Disclaimer

General Disclaimer

The information provided by TrimCraft (“https://www.trolltrim.com”) is for general informational and educational purposes only. All information on the site is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the site.

The use of any information or tools from this website is entirely at your own risk. It is your responsibility to ensure that any information or tools available through this website meet your specific requirements and circumstances.

Confirm the Real Numbers

Calculator results and guidance on TrimCraft are informational only and may not match your specific materials. The true fabric, trim, or thread a project needs depends on figures that vary: your fabric’s exact usable width, its nap and print repeat, the seam finish you choose, your machine’s tension and stitch settings, and your own cutting accuracy. Before you cut into fabric you can’t replace, or buy trim or thread for a large batch, confirm the quantities with a test cut or a small trial run.

Not Professional Tailoring Advice

Content and tools on TrimCraft, including the Fabric Yardage Calculator, Seam Allowance Calculator, Bias Tape Length Calculator, Trim & Ribbon Quantity Calculator, Pattern Scaling Calculator, and Thread Consumption Estimator, are for educational and informational purposes only. They do not constitute professional tailoring, patternmaking, or garment-engineering advice of any kind. The figures our tools produce are general estimates, not guarantees, and a spoiled cut or a project that runs short on materials is a real possibility if a result isn’t checked against your own fabric and pattern first.

Tool Accuracy and Limitations

Calculation Accuracy

Our calculators provide estimates based on standard sewing conventions, the figures you enter, and widely used formulas from sewing and garment-manufacturing references. Results should be used as starting points and planning aids, not absolute values or guaranteed outcomes.

Factors Affecting Accuracy

Actual results may vary significantly due to:

• Fabric Behaviour: Usable width after selvages, stretch, drape, and how efficiently a layout nests differ by fabric.
• Construction Choices: Seam finish, hem depth, and stitch type all change how much fabric, trim, or thread a project actually consumes.
• Machine & Technique: Tension settings, stitch length, and cutting accuracy affect thread use and cut sizes in practice.
• Measurement Factors: Self-reported figures, rounding, and estimation.

Our Recommendations

• Use tool results as starting points and planning aids, not absolute values.
• Cut a test piece or run a small trial before committing an expensive or irreplaceable fabric.
• Buy a modest margin of extra fabric, trim, or thread beyond the bare estimate.
• Follow your specific pattern’s instructions where they differ from a general convention.

No Warranty

TrimCraft expressly disclaims all warranties, whether express, implied, statutory, or otherwise, including implied warranties of merchantability, fitness for a particular purpose, and non-infringement. We do not warrant that our tools, calculations, or information are error-free, accurate, or complete, or that our website will be available without interruption.

Limitation of Liability

To the maximum extent permitted by applicable law, in no event shall TrimCraft be liable for any direct, indirect, punitive, incidental, special, consequential, or exemplary damages, including without limitation damages for wasted fabric, trim, or thread, a spoiled project, lost time, or data arising out of or related to your use of our tools and services.

User Responsibility

By using TrimCraft tools and services, you acknowledge and agree that:

• You will use your own judgment when applying our estimates to your specific materials.
• You will verify results with a test cut or trial before committing valuable fabric or a large batch.
• You assume all risks associated with cutting, sewing, purchasing, and the use of our tools and information.

External Links Disclaimer

The site may contain links to other websites or content from third parties. Such external links are not investigated, monitored, or checked for accuracy, adequacy, validity, reliability, availability, or completeness by us. We do not warrant, endorse, guarantee, or assume responsibility for the accuracy or reliability of any information offered by third-party websites linked through the site.

Advertising Disclaimer

TrimCraft displays advertisements from third-party advertising networks, including Google AdSense. These advertisements are clearly distinguishable from our editorial content. The presence of advertisements does not constitute an endorsement of the advertised products or services.

Changes to This Disclaimer

We reserve the right to modify this disclaimer at any time. Changes will be posted on this page with an updated revision date. Your continued use of the website and tools after any changes indicates your acceptance of the modified disclaimer.

Contact Us

If you have any questions or concerns about this Disclaimer, please visit our Contact page or email us at support@trolltrim.com.